F 350 2WD Super Duty V10-6.8L (2009)
Removal
1. With the vehicle in NEUTRAL, position it on a hoist.
2. Press the position retaining tabs and rotate the lower cooling fan shroud upward until the position retainer tab locks into position.
3. Rotate the tensioner clockwise and remove the accessory drive belt.
4. Remove the crankshaft pulley bolt and washer.
-
Discard the crankshaft pulley bolt.
5. Using the Crankshaft Vibration Damper Remover, remove the crankshaft pulley.
