F 350 2WD Super Duty V10-6.8L (2009)
20. NOTICE: The camshaft bearing caps must be installed in their original locations. Record camshaft bearing cap locations. Failure to
follow these instructions may result in engine damage.
Remove the remaining 10 bolts in the sequence shown and remove the RH cylinder head camshaft bearing caps.
21. Clean and inspect the RH camshaft bearing caps.
-
The camshaft front thrust bearing cap contains an oil metering groove. Make sure the groove is free of foreign material.
22. Remove the RH camshaft.
23. NOTICE: Remove the front thrust camshaft bearing cap straight upward from the bearing towers, or the bearing cap may be damaged
from side loading.
Remove the 2 bolts and the LH camshaft front bearing cap.
24. NOTICE: The camshaft bearing caps must be installed in their original locations. Record camshaft bearing cap locations. Failure to
follow these instructions may result in engine damage.
Remove the remaining 10 bolts in the sequence shown and remove the LH cylinder head camshaft bearing caps.