F 350 2WD Super Duty V10-6.8L (2009)
13. Preposition the camshafts in the following sequence.
1. Rotate the LH camshaft until the timing mark is approximately at 12 o'clock.
2. Rotate the RH camshaft until the timing mark is approximately at 11 o'clock.
14. NOTICE: Rotate the crankshaft counterclockwise only. Do not rotate past the position shown or severe piston and/or valve damage can
occur.
Position the crankshaft with the Crankshaft Holding Tool, then remove the tool.
15. Install the crankshaft sprocket, making sure the flange faces forward.
16. Install the lower end of the LH timing chain, aligning the timing marks.