F 350 2WD Super Duty V10-6.8L (2009)
Removal
1. With the vehicle in NEUTRAL, position it on a hoist.
2. Drain the engine oil.
3. Remove the engine cooling fan shroud.
4. Remove the engine cooling fan.
5. Remove the RH valve cover. For additional information, refer to Valve Cover - RH See: Cylinder Head Assembly/Valve Cover/Service and
Repair/Valve Cover - RH.
6. Remove the LH valve cover. For additional information, refer to Valve Cover - LH See: Cylinder Head Assembly/Valve Cover/Service and
Repair/Valve Cover - LH.
7. Rotate the tensioner clockwise and remove the accessory drive belt.
8. Remove the 3 bolts and position the power steering pump aside.
9. Remove the crankshaft pulley bolt and washer.
-
Discard the crankshaft pulley bolt.
10. Using the Crankshaft Vibration Damper Remover, remove the crankshaft pulley.
