F 350 2WD Super Duty V10-6.8L (2009)
Driver/Vehicle Information Display: Reset Procedure
Oil Life Reset - Message Center Cluster
Message Center Configuration
Oil Life Reset - Message Center Cluster
1. Press and release the SETUP button until the message center displays OIL LIFE XXX% HOLD RESET = NEW OIL.
2. Press and hold the RESET button for 2 seconds and release when the message center displays OIL LIFE SET TO XXX%.
3. Press and release the SETUP button to exit the procedure.
Oil Life Reset - Base Instrument Cluster (IC)
Message Center Configuration
Oil Life Reset - Base Instrument Cluster (IC)
NOTE: All message center functions are carried out using the single stem SELECT/RESET button in the Instrument Cluster (IC).
1. Press and release the SELECT/RESET button to scroll through the information displays until the message center displays HOLD RESET FOR
SETUP MENU.
2. Press and hold the SELECT/RESET button for approximately 2 seconds until the message center displays OIL LIFE XXX% HOLD RESET =
NEW.
3. Press and hold the SELECT/RESET button for approximately 2 seconds until the message center displays OIL LIFE SET TO XXX%.
4. Release the SELECT/RESET button and allow the setup timer to expire to exit the procedure.
Oil Life Start Value - Message Center Cluster
Message Center Configuration
Oil Life Start Value - Message Center Cluster
1. Press and release the SETUP button until the message center displays OIL LIFE XXX% HOLD RESET = NEW OIL.
2. Press and hold the RESET button for 2 seconds and release when the message center displays OIL LIFE SET TO XXX%.
3. Press and release the RESET button to decrease the oil life start value (from 100% to 10%) for each 10% reduction until the desired oil life start
value is displayed.
4. Press and release the SETUP button to exit the procedure.
Oil Life Start Value - Base Instrument Cluster (IC)
Message Center Configuration
Oil Life Start Value - Base Instrument Cluster (IC)
NOTE: All message center functions are carried out using the single stem SELECT/RESET button in the Instrument Cluster (IC).
1. Press and release the SELECT/RESET button to scroll through the information displays until the message center displays HOLD RESET FOR
SETUP MENU.
2. Press and hold the SELECT/RESET button for approximately 2 seconds until the message center displays OIL LIFE XXX% HOLD RESET =
NEW.
3. Press and hold the SELECT/RESET button for approximately 2 seconds until the message center displays OIL LIFE SET TO XXX%.
