ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

Initial Inspection and Diagnostic Overview|Page 8611 > < Initial Inspection and Diagnostic Overview|Page 8609
Page 5
background image

-

Is the voltage greater than 10 volts?

Yes

GO to C3.

No

GO to C4.

-------------------------------------------------
C3 CHECK THE DOOR AJAR GROUND CIRCUITS FOR AN OPEN

-

Disconnect: Negative Battery Cable.

-

Measure the resistance between the suspect ajar switch connector, harness side and ground as follows:

-

Is the resistance less than 5 ohms?

Yes

INSTALL a new ajar switch in question. CLEAR the DTCs. REPEAT the self-test.

No

REPAIR the circuit in question. CLEAR the DTCs. REPEAT the self-test.

-------------------------------------------------
C4 CHECK THE DOOR AJAR SWITCH INPUT CIRCUITS

-

Disconnect: SJB C2280c.

-

Measure the resistance between the suspect ajar switch connector, harness side and the SJB connector, harness side as follows:

Initial Inspection and Diagnostic Overview|Page 8611 > < Initial Inspection and Diagnostic Overview|Page 8609