ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

Initial Inspection and Diagnostic Overview|Page 8612 > < Initial Inspection and Diagnostic Overview|Page 8610
Page 6
background image

-

Is the resistance less than 5 ohms?

Yes

GO to C8.

No

REPAIR the circuit in question. CLEAR the DTCs. REPEAT the self-test.

-------------------------------------------------
C5 CHECK THE INSTRUMENT PANEL DIMMER SWITCH

NOTE: Make sure the doors are closed.

-

Ignition OFF.

-

Disconnect: Instrument Panel Dimmer Switch C2065.

-

Are the courtesy lamps still illuminated?

Yes

GO to C6.

No

INSTALL a new instrument panel dimmer switch. CLEAR the DTCs. REPEAT the self-test.

-------------------------------------------------
C6 CHECK CIRCUIT CLN28 (GN/BU) FOR A SHORT TO GROUND

-

Disconnect: SJB C2280b.

-

Measure the resistance between the instrument panel dimmer switch C2065-2, circuit CLN28 (GN/BU), harness side and ground.

-

Is the resistance greater than 10,000 ohms?

Yes

GO to C8.

No

REPAIR the circuit. CLEAR the DTCs. REPEAT the self-test.

-------------------------------------------------
C7 CHECK CIRCUITS CLN03 (YE/GY), CLN26 (BU) AND CLN25 (VT) FOR A SHORT TO VOLTAGE

-

Ignition OFF.

-

Disconnect: SJB C2280a (DTC B2A35 or DTC B2A37).

Initial Inspection and Diagnostic Overview|Page 8612 > < Initial Inspection and Diagnostic Overview|Page 8610