ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

Initial Inspection and Diagnostic Overview|Page 8851 > < Initial Inspection and Diagnostic Overview|Page 8849
Page 5
background image

P8 CHECK FOR VOLTAGE TO THE INOPERATIVE PARKING LAMP USING THE CONNECTOR GROUND

-

Measure the voltage between the inoperative lamp, harness side as follows:

-

Is the voltage greater than 10 volts?

Yes

INSTALL a new bulb holder, cab marker lamp, rear lamp assembly or trailer tow exterior mirror in question. REFER to Cab Marker Lamp  See: Marker
Lamp/Service and Repair/Cab Marker Lamp or Mirrors as necessary. TEST the system for normal operation.

No

REPAIR the ground circuit in question for an open. TEST the system for normal operation.

-------------------------------------------------
P9 CHECK FOR CORRECT SJB OPERATION

Initial Inspection and Diagnostic Overview|Page 8851 > < Initial Inspection and Diagnostic Overview|Page 8849