F 350 2WD Super Duty V10-6.8L (2009)
Removal and Installation
Aerodynamic style headlamp
1. Remove the headlamp assembly. For additional information, refer to Headlamp Assembly See: Headlamp/Service and Repair.
Sealed beam style headlamp
2. Remove the bolt, 3 screws and the side lamp/front turn signal lamp housing.
-
Disconnect the electrical connectors.
All headlamp types
3. Rotate the bulb holder counterclockwise approximately one-eighth turn and remove it.
-
Separate the bulb from the bulb holder.
4. To install, reverse the removal procedure.
