F 350 2WD Super Duty V10-6.8L (2009)
Axle Nut: Specifications
Full Floating Axle - Dana
Hub Nut
Step 1 ......................................................................................................................................................................................... Tighten to 95 Nm (70 lb-ft).
Step 2 .................................................................................................................................................................................. Back off the hub nut 90 degrees.
Step 3 ...................................................................................................................................................................... Tighten the hub nut to 24 Nm (18 lb-ft).
To verify that there is no side-to-side end play, attach a magnetically mounted dial indicator to the spindle end and place the dial indicator tip on the
outboard surface of the hub. Check for side-to-side end play.
- Final bearing adjustment has zero end play. The maximum torque to rotate the hub is 2.3 Nm (20 lb-in) when end play is zero.
