F 350 2WD Super Duty V10-6.8L (2009)
Power Distribution Module: Service and Repair
Upfitter Relay Box
Upfitter Relay Box
Removal and Installation
1. Remove the upfitter switch assembly. For additional information, refer to Upfitter Switch See: Upfitter Switch.
2. Remove the instrument panel steering column opening cover.
3. Disconnect the 14A303 harness from the 14401 harness in-line connector.
4. Remove the ground terminal screw and position the 14A303 harness ground terminal aside.
-
To install, tighten to 12 Nm (106 lb-in).
5. Remove the 2 screws and the upfitter relay box and harness assembly.
6. To install, reverse the removal procedure.
