ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

Initial Inspection and Diagnostic Overview|Page 3111 > < Initial Inspection and Diagnostic Overview|Page 3109
Page 40
background image

-

Are the resistances less than 5 ohms?

Yes

GO to Q3.

No

REPAIR the circuit. CONNECT the negative battery cable. CLEAR the DTCs. REPEAT the network test with the scan tool.

-------------------------------------------------
Q3 CHECK THE HS-CAN CIRCUITS BETWEEN THE APIM AND THE
DLC FOR AN OPEN

-

Measure the resistance between the APIM C3342-53, circuit VDB04 (WH/BU), harness side and the Data Link Connector (DLC) C251-6, circuit
VDB04 (WH/BU), harness side.

-

Measure the resistance between the APIM C3342-54, circuit VDB05 (WH), harness side and the DLC C251-14, circuit VDB05 (WH), harness
side.

-

Are the resistances less than 5 ohms?

Yes

GO to Q4.

No

REPAIR the circuit in question. CONNECT the negative battery cable. CLEAR the DTCs. REPEAT the network test with the scan tool.

-------------------------------------------------
Q4 CHECK THE MS-CAN CIRCUITS BETWEEN APIM AND THE
DLC FOR AN OPEN

-

Measure the resistance between the APIM C3342-16, circuit VDB06 (GY/OG), harness side and the DLC C251-3, circuit VDB06 (GY/OG),
harness side.

Initial Inspection and Diagnostic Overview|Page 3111 > < Initial Inspection and Diagnostic Overview|Page 3109