F 350 2WD Super Duty V10-6.8L (2009)
Camshaft Position Sensor: Description and Operation
Engine Control Components
Engine Control Components
Camshaft Position (CMP) Sensor
The CMP sensor detects the position of the camshaft. The CMP sensor identifies when piston number 1 is on its compression stroke. A signal is then sent
to the PCM and used for synchronizing the sequential firing of the fuel injectors. Coil on plug (COP) ignition applications use the CMP signal to select
the correct ignition coil to fire.
Vehicles with two CMP sensors are equipped with variable camshaft timing (VCT). The second sensor is used to identify the position of the camshaft on
bank 2.
There are two types of CMP sensors: the 2-pin variable reluctance type sensor and the 3-pin Hall-effect type sensor.
Typical Variable Reluctance CMP Sensor
Typical Variable Reluctance CMP Sensor
Typical Hall-effect CMP Sensor
Typical Hall-effect CMP Sensor
