F 350 2WD Super Duty V10-6.8L (2009)
4. NOTE: Place an X mark on the old air bag cover to avoid reinstalling.
Remove the passenger air bag cover from the canister, separating the top windows from the canister hooks.
Installation
1. Place the passenger air bag cover on a clean work surface once it is removed from the shipping package.
2. WARNING: Carefully inspect the passenger air bag trim cover, canister and soft pack before assembly. If any foreign objects are found,
remove them before attaching the passenger air bag trim cover to the canister. If the canister or soft pack is damaged, install a new
passenger air bag module assembly. Failure to follow this instruction may result in the passenger air bag module deploying incorrectly,
which increases the risk of serious personal injury or death in a crash.
Match the number of cover windows to the number of canister hooks before attaching the passenger air bag cover to the canister.
3. Match the top of the passenger air bag cover with the canister mark from the removal procedure.
4. Position the canister onto the passenger air bag cover and engage the bottom hooks into the air bag cover windows.
5. Push the top of the passenger air bag cover to engage the top canister hooks.
6. Inspect the passenger air bag cover windows-to-canister hooks to verify that every window has a hook installed and the sides are not tucked or
folded against the air bag canister.
7. Install the passenger air bag module. For additional information, refer to Passenger Air Bag Module See: Passenger Air Bag Module.
