F 350 2WD Super Duty V10-6.8L (2009)
-
bucket seats
-
Follow the Removal and Installation procedures in Seats.
4. If equipped, remove the floor console and disconnect the powerpoint electrical connector.
5. NOTICE: Lift the carpet before cutting between the perforations to avoid damage to the wiring harnesse(s) underneath. Failure to follow
this instruction may result in component damage and/or system failure.
If equipped, position the carpet aside:
-
Reach through the perforations and lift the carpet.
-
Cut between the perforations in the carpeting as shown.
-
Fold back the carpet flap to gain access to the RCM.