F 350 2WD Super Duty V10-6.8L (2009)
Key: Testing and Inspection
Key Programming Switch State Control
Key Programming Switch State Control
NOTE: The spare key programming switch is a programmable switch which provides the capability to enable/disable the normal customer spare key
programming procedure detailed in the Owner's Literature. It must read ENABLE if more than 2 keys need to be programmed into the Instrument Cluster
(IC). For additional information, refer to Key Programming Using Two Programmed Keys See: Accessories and Optional Equipment/Antitheft and
Alarm Systems/Testing and Inspection/Programming and Relearning/Key Programming Using Two Programmed Keys. This programmable switch is
provided as a convenience for rental company fleets or other fleet purchasers who may not want the spare key programming procedure available to the
vehicle driver.
NOTE: The spare key programming switch state can be viewed with the IC PID SPAREKEY.
NOTE: If the SPAREKEY PID reads ENABLE, up to 8 keys total can be programmed into the IC. For additional information, refer to Key
Programming Using Two Programmed Keys See: Accessories and Optional Equipment/Antitheft and Alarm Systems/Testing and
Inspection/Programming and Relearning/Key Programming Using Two Programmed Keys. If the SPAREKEY PID reads DISABLED, the key
programming using two programmed keys procedure cannot function. This switch is set to ENABLE when the vehicle is built. This switch does not
affect the key programming using diagnostic equipment, the spare key programming - unlimited key mode or the spare key programming - using
diagnostic equipment procedures.
1. Insert a programmed Passive Anti-Theft System (PATS) key into the ignition lock cylinder and turn the key from the OFF position to the ON
position.
2. From the scan tool, enter TOOLBOX. Select BODY - SECURITY - PATS Functions and follow the on-screen instructions to ENTER
SECURITY ACCESS. This procedure takes approximately 10 minutes to carry out, during which time the ignition key must be in the ON position
and the scan tool must be connected to the vehicle. For additional information, refer to Anti-Theft Security Access See: Accessories and Optional
Equipment/Antitheft and Alarm Systems/Testing and Inspection/Component Tests and General Diagnostics.
3. NOTE: The default setting on delivery of all new vehicles is ENABLE.
From the scan tool menu select: "Customer Spare Key Programming Enable" (or "Customer Spare Key Programming Disable") and follow the
on-screen instructions.
-
"Customer Spare Key Programming Enable" - spare key programming procedure is accessible.
-
"Customer Spare Key Programming Disable" - spare key programming procedure is not accessible.
Key Programming Using Diagnostic Equipment
Key Programming Using Diagnostic Equipment
NOTE: This procedure is used when a customer needs keys programmed into the system and does not have 2 programmed ignition keys available. This
procedure is also useful when a programmed ignition key(s) is lost or the ignition lock cylinder is replaced, and it is desired to erase key code(s) from the
