F 350 2WD Super Duty V10-6.8L (2009)
Transmissions with a fixed flange
3. Install the extension housing-to-case bolts.
-
Tighten to 47 Nm (35 lb-ft).
4. Using the Output Shaft Locknut Socket, install a new output shaft retaining nut.
-
Tighten to 200 Nm (148 lb-ft).
5. Install the output shaft flange and a new output shaft flange bolt.
-
Tighten to 130 Nm (96 lb-ft).
All vehicles
6. Connect the OSS sensor.
7. Install the transmission insulator and lower the transmission onto the crossmember.
