F 350 2WD Super Duty V10-6.8L (2009)
7. Remove the selector lever mechanism lower bolt.
8. Disconnect the Brake Shift Interlock Actuator (BSIA) electrical connector and remove the selector lever mechanism upper bolts and the selector
lever mechanism from the vehicle.
9. Remove the BSIA from the selector lever mechanism.
1. Pull the BSIA override button.
2. Remove the BSIA screw.
3. Gently pry the clip up and remove the BSIA.
Installation
1. Install the BSIA onto the selector lever mechanism.
1. Pull the BSIA override button.
2. Align the selector lever tab into the BSIA.
3. Position and secure the BSIA with the clip.
4. Install the screw.