F 350 2WD Super Duty V10-6.8L (2009)
13. NOTICE: Thread sealant or tape should never be used on the threads of the transmission fluid cooler fittings. The use of such materials
will create a leak path.
Install a new O-ring on the transmission fluid cooler fitting.
14. Making sure that the gasket between the transmission fluid cooler and the inside of the radiator tank is still in place, install the lower transmission
fluid cooler fittings.
-
Tighten to 60 Nm (44 lb-ft).
15. Make sure that no radiator coolant has entered the transmission fluid cooler. Install the radiator in the vehicle.
16. Verify that both the transmission and the engine cooling system are at the correct fluid levels.