F 350 2WD Super Duty V10-6.8L (2009)
8. Remove the LH support crossmember-to-frame bolt, nut and the crossmember.
1. Remove the bolt and nut
2. Remove the crossmember.
Installation
1. If required, install a new transmission insulator stud.
-
Tighten to 75 Nm (55 lb-ft).
2. Position the crossmember to the transmission insulator and loosely install the transmission insulator-to-crossmember nut.
3. Install the LH support crossmember-to-frame bolts.
-
Tighten to 81 Nm (60 lb-ft).
4. Install the RH support crossmember-to-frame bolts.
-
Tighten to 81 Nm (60 lb-ft).
5. Install the bracket and loosely install the bolts.
1. Install the crossmember-to-frame bracket.
