F 350 2WD Super Duty V10-6.8L (2009)
Seals and Gaskets: Service and Repair
Tremec 5-Speed
Output Shaft Seal
Removal
1. With the vehicle in NEUTRAL, position it on a hoist.
2. Disconnect the rear driveshaft from the transmission and position it aside.
3. Using the Drive Pinion Flange Holding Fixture, remove the transmission flange retainer nut and washer.
4. Using the 2 or 3 Jaw Puller, remove the transmission flange.
5. Remove and discard the output shaft seal.
