F 350 2WD Super Duty V10-6.8L (2009)
Transmissions without a fixed flange
4. NOTE: Prior to removing the sensor, make sure that the area around the sensor is free of foreign material to prevent contamination entering the
transmission.
Remove the OSS sensor.
1. Remove the bolt.
2. Remove the OSS sensor.
Installation
Transmissions with a fixed flange
1. Install the OSS sensor.
1. Lubricate the O-ring with transmission fluid and install the OSS sensor.
2. Install the bolt.
-
Tighten to 9 Nm (80 lb-in).
Transmissions without a fixed flange
2. Install the OSS sensor.
1. Lubricate the O-ring with transmission fluid and install the OSS sensor.
2. Install the bolt.
-
Tighten to 9 Nm (80 lb-in).
All vehicles
