F 350 2WD Super Duty V10-6.8L (2009)
Transmission Temperature Sensor/Switch: Service and Repair
TorqShift
Transmission Fluid Temperature (TFT) Sensor
Removal
1. Remove the transmission fluid pan, pan gasket and filter. For additional information, refer to Fluid Pan, Gasket and Filter See: Automatic
Transmission/Transaxle/Fluid Filter - A/T/Service and Repair/Fluid Pan, Gasket and Filter.
2. Disconnect the Transmission Fluid Temperature (TFT) sensor.
3. Press the tab, rotate the TFT sensor counterclockwise and pull out.
4. Inspect the O-ring seal. If the O-ring seal is damaged, install a new TFT sensor.
Installation
1. Lubricate the O-ring seal with transmission fluid and install a new TFT sensor. Make sure to slightly rotate the sensor clockwise to lock it in place.
2. Connect the TFT sensor.
3. Install the transmission fluid filter, pan gasket and pan. For additional information, refer to Fluid Pan, Gasket and Filter See: Automatic
Transmission/Transaxle/Fluid Filter - A/T/Service and Repair/Fluid Pan, Gasket and Filter.
