F 350 2WD Super Duty V10-6.8L (2009)
Wiper Arm: Service and Repair
Wiper Mounting Arm and Pivot Shaft
Wiper Mounting Arm and Pivot Shaft
Removal and Installation
1. Remove the cowl top vent panels.
2. Remove the 3 wiper mounting arm and pivot shaft bolts.
-
To install, tighten to 8 Nm (71 lb-in).
3. Disconnect the wiper motor electrical connector.
4. Remove the wiper mounting arm and pivot shaft assembly.
5. To install, reverse the removal procedure.
