F 350 2WD Super Duty V10-6.8L VIN S (1999)
4. Position the instrument panel fuse junction panel aside.
1
Remove the nuts.
2
Remove the bolts.
5. Remove the Generic Electronic Module/Central Timer Module (GEM/CTM).
1
Disconnect the electrical connectors.
2
Remove the screws.
3
Remove the GEM/CTM.
INSTALLATION
1. To install, reverse the removal procedure.
NOTE: When the battery is disconnected and reconnected, some abnormal drive symptoms may occur while the vehicle relearns its adaptive
strategy. The vehicle may need to be driven 16 km (10 miles) or more to relearn the strategy.