ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

Supercab|Page 8940 > < Manual Window Regulator|Page 8933
Page 1
background image

Rear Door Exterior Handle: Service and Repair
Supercab

REMOVAL

1. Remove the rear door interior trim panel.

2. Disconnect all necessary control rods from the remote control.

3. Remove the outside door handle.

1. Drill out the rivets.
2. Remove the outside door handle.

INSTALLATION

1. Install the outside door handle; refer to Specifications for the correct replacement of the outside door handle rivets.

NOTE:  If the component is to be replaced, refer to the Ford Master Parts Catalog for specific part information.

2. Follow the removal procedure in reverse order.

Supercab|Page 8940 > < Manual Window Regulator|Page 8933