F 350 2WD Super Duty V10-6.8L VIN S (1999)
Attachment III - Technical Information
For the inspection and, if necessary, installation of a new jack:
1.
Identify vehicle:
^
1999 Superduty F-350 Supercab Dual Rear Wheel (DRW) wide frame vehicle.
^
Wide frame indicates vehicle either has a box or is a box delete option with mid-ship fuel tank visible.
2.
Locate vehicle's jack:
^
underneath rear seat on passenger's side or
^
On floor behind the front seats.
3.
Identify part number of jack:
^
F81A-17080-AC (Orange handled 2 ton bottle jack)
^
F81A-17080-BC (Yellow handled 33/4 ton bottle jack)
4.
If vehicle has jack F81A-17080-AC (orange handled 2 ton bottle jack):
^
Correct jack is installed.
^
Submit Recall Claim; vehicle is released from Stop Sale and can be delivered to an owner.
^
Follow directions below to properly stow and secure jack underneath rear seat on passenger side.
5.
If vehicle has jack F81A-17080-BC (yellow handled 33/4 ton bottle jack):
^
Incorrect jack is installed and vehicle can not be delivered to any owner.
^
Order jack F81Z-17080-AA (yellow handled 33/4 ton bottle jack).
^
Install jack, F81Z-17080-AA, following the instructions below.
^
Return incorrect jack through Ford Warranty Claims System.
^
Submit Recall Claim; vehicle is released from Stop Sale and can be delivered to an owner.
Jack Stowage Instructions:
1.
Access supercab rear seating area by opening the passenger side rear door.
2.
Flip over the lower cushion of rear seat by pulling upward on the loop found between the cushions on the rear seat.
