F 350 2WD Super Duty V10-6.8L VIN S (1999)
Hydraulic Control Assembly - Antilock Brakes: Service and Repair
4-Wheel Anti-Lock Brake System
Removal
CAUTION: Be careful not to damage the finger-like valve cartridges while removing and installing the anti-lock brake control module.
1. CAUTION: Electronic modules are sensitive to static electrical charges. If exposed to these charges, damage may result. Disconnect the
battery ground cable.
2. Remove the air cleaner.
3. Remove the EVAP canister.
4. WARNING: Brake fluid contains polyglycol ethers and polyglycols. Avoid contact with eyes. Wash hands thoroughly after handling. If
brake fluid contacts eyes, flush eyes with running water for 15 minutes. Get medical attention if irritation persists. If taken internally,
drink water and induce vomiting. Get medical attention immediately.
CAUTION: Brake fluid is harmful to painted and plastic surfaces. If brake fluid is spilled onto a painted or plastic surface, immediately
wash it with water.
NOTE: Plug each port to prevent brake fluid from spilling.
NOTE: Motorhome is similar.
Disconnect the hydraulic brake lines.
1
Disconnect the inlet hydraulic brake lines.
2
Disconnect the outlet hydraulic brake lines.
