F 350 2WD Super Duty V10-6.8L VIN S (1999)
6. Measure the front disc brake rotor thickness.
-
Replace the front disc brake rotor if not within specification.
7. Inspect the disc brake caliper for leaks.
-
If leaks are found, disassembly is required.
8. Remove the pads and rail clips.
1. Remove the pads.
2. Remove the front disc brake caliper anchor plate stainless steel rail clips.
Installation
1. CAUTION: Do not allow grease, oil, brake fluid or other contaminants to contact the pad lining material. Do not install contaminated
pads.
Install the pads.
