F 350 2WD Super Duty V10-6.8L VIN S (1999)
2. Lubricate the front wheel bearings.
-
Use Premium Long-Life Grease XG-1-C or K or equivalent meeting Ford specification ESA-M1C175-B.
3. Install a new wheel hub grease seal.
1
Install the inner front wheel bearing.
2
Install a new wheel hub grease seal.
4. Install the front disc brake hub and rotor.
1
Position the front disc brake hub and rotor.
2
Install the outer front wheel bearing.
3
Install the front wheel outer bearing retainer washer.
4
Install the spindle nut.
5. While rotating the front disc brake hub and rotor, tighten the spindle nut.