F 350 2WD Super Duty V10-6.8L VIN S (1999)
Heater Core: Service and Repair
Removal and Installation
REMOVAL
NOTE: If a heater core leak is suspected, the heater core must be leak-tested before it is removed from the vehicle.
1. Drain the radiator.
2. Disconnect the heater water hoses from the heater core.
3. Disengage the stops and lower the glove compartment door.
4. Remove the electronic blend door actuator and bracket assembly.
1
Remove the screw.
2
Rotate the blend door actuator and bracket assembly.
3
Remove the electronic blend door actuator and bracket assembly.
5. Remove the screws.