F 350 2WD Super Duty V10-6.8L VIN S (1999)
Clutch Fluid: Service and Repair
Bleeding - Clutch Master Cylinder
1. CAUTION: So as not to trap air in the clutch hydraulic system, fill any disconnected component (such as master cylinder, slave cylinder) with the
specified brake fluid before connecting it.
Support the clutch hydraulic system components so that the reservoir is above the master cylinder and the slave cylinder is below the master
cylinder.
2. Fill the clutch master cylinder reservoir to the full line with DOT 3 Brake Fluid.
^
Use Ford High Performance DOT 3 Motor Vehicle Brake Fluid C6AZ-19542-AB or equivalent meeting Ford specification ESA-M6C25-A.
3. CAUTION: Do not allow the clutch master cylinder reservoir to run dry.
