F 350 2WD Super Duty V10-6.8L VIN S (1999)
Catalytic Converter: Service and Repair
Removal
1. Raise the vehicle.
2. Disconnect the catalytic monitor sensor electrical connector.
3. Support the exhaust system.
4. NOTE: The exhaust hanger insulators can be reused if they show no signs of damage.
Remove the exhaust hanger insulators and discard if damaged.
5. Remove the three nuts and the exhaust hanger bracket and gasket. Discard the gaskets.
6. Remove the TWC-to-muffler clamp and exhaust hanger.
