F 350 2WD Super Duty V10-6.8L VIN S (1999)
5.
Working through the right wheel opening, position the pickup box cable through the hole in the pickup box channel brace as shown in Figure 3.
6.
Starting from the inboard side of the right frame rail, install the new bolt through the cable eyelet so that the flat side is against the frame rail, and
then through (rearward of the pickup box channel and above the oblong hole in the frame) and the other cable eyelet. Install the retaining nut.
Tighten the nut to 48 Nm (35 lb-ft). See Figure 4.
7.
Lower the vehicle.
Fuel Tank Bracket Replacement
WARNING
DO NOT SMOKE OR CARRY LIGHTED TOBACCO OR HAVE OPEN FLAME OF ANY TYPE WHEN WORKING ON OR NEAR ANY
FUEL RELATED COMPONENT. HIGHLY FLAMMABLE MIXTURES ARE ALWAYS PRESENT AND MAY BE IGNITED, RESULTING IN
POSSIBLE PERSONAL INJURY OR PROPERTY DAMAGE.
1.
Remove the fuel filler cap.