ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

Throttle Position Sensor > < A/C - Heater Core Electrolysis/Leakage|Page 4234
Page 1
background image

Inertia Fuel Shutoff Switch: Service and Repair

REMOVAL

1. Disconnect the battery ground cable.
2. Remove the RH cowl side trim panel. On Motorhome chassis, the Inertia Fuel Shutoff (IFS) switch is located near the engine cover under the

dash, above the accelerator pedal.

3. Disconnect the electrical connector.

4. Remove the inertia fuel shutoff switch.

1

Remove the bolts.

2

Remove the inertia fuel shutoff switch.

INSTALLATION

1. Follow the removal procedure in reverse order.

Throttle Position Sensor > < A/C - Heater Core Electrolysis/Leakage|Page 4234