F 350 2WD Super Duty V10-6.8L VIN S (1999)
INSTALLATION
WARNING: The tightening torque of the air bag electronic crash sensor (ECS) module retaining screws is critical for proper system
operation.
NOTE:
-
Make sure to tighten the retaining bolts to specification.
-
A repair is made by replacement only. If a part is replaced and the new part does not correct the condition, install the original part and perform the
diagnostic procedure again.
1. Follow the removal procedure in reverse order.
2. NOTE: When a new ECS is first installed in the vehicle, module configuration must be carried out. If the ECS is incorrectly configured, erroneous
DTC(s) will result.
If a new ECS is being installed, configure the ECS using a scan tool.
