F 350 2WD Super Duty V10-6.8L VIN S (1999)
1. Install the safety belt tongue.
1
Position the safety belt tongue.
2
Make sure the safety belt tongue is positioned in the retaining strap.
3
Install the safety belt tongue nut.
2. Install the safety belt buckle.
1
Position the safety belt buckle.
2
Make sure the safety belt buckle is positioned in the retaining strap.
3
Install the safety belt buckle nut.
3. Check the restraint system for proper operation.
Rear - Crew Cab
Torx Bit Tool Set Used For T55 "Torx Plus" Bit
Special Tool(s)
REMOVAL