F 350 2WD Super Duty V10-6.8L VIN S (1999)
Safety Belt Bolt Bit
Special Tool(s)
REMOVAL
1. Remove the shoulder strap guide.
1
Position the shoulder strap guide cover up.
2
Use the Safety Belt Bolt Bit to remove the bolt.
3
Remove the shoulder strap guide.
2. Position the rear seat back forward.
3. Remove the utility tray, if necessary.
4. Remove the rear door scuff plate and the rear corner trim panel.
5. Remove the safety belt retractor.
1
Use the Safety Belt Bolt Bit to remove the bolt.
2
Remove the safety belt retractor.
6. Remove the safety belt anchor.
