F 350 2WD Super Duty V10-6.8L VIN S (1999)
1. Follow the removal procedure in reverse order.
-
Check the restraint system for proper operation.
NOTE:
-
Make sure the safety belt webbing is not twisted prior to installation.
-
Make sure to tighten bolts to specification.
Rear Safety Belt and Tongue
Safety Belt Bolt Bit
Special Tool(s)
REMOVAL
1
Remove the shoulder strap guide.
1
Position the shoulder strap guide cover up.
2
Use the Safety Belt Bolt Bit to remove the bolt.
3
Remove the shoulder strap guide.
2. Remove the rear seat.
3. Remove the rear seat back upper moulding.