F 350 2WD Super Duty V10-6.8L VIN S (1999)
has +0.25-degree caster as installed, select the 1-degree service adjuster and orient the slot 225 degrees from the straight-ahead position. In
all cases, select the adjuster and orientation that will bring the alignment closest to the optimal settings.
6. Loosen the pinch bolt. Remove the adjuster from the axle.
7. Install the new service adjuster. Orient the slot as noted in Step 5.
1
Position the new adjuster as specified in the chart.
2
Tighten the pinch bolt.
8. Install the front wheel.
9. Lower the front end.
10. Check the alignment. If not at optimal caster/camber specification, additional adjustment of the rotational orientation of the adjuster is required.
11. Once optimal caster/camber has been achieved, reset the toe and clear vision to optimal settings.
