F 350 2WD Super Duty V10-6.8L VIN S (1999)
4. NOTE: After removal, discard the filter and seal assembly.
Remove the filter and seal assembly by carefully pulling and rotating the filter as necessary.
5. CAUTION: Be careful not to scratch or damage the aluminum bore. The new seal may leak and damage to the case will result.
If the seal remains in the pump bore, remove it carefully with a small screwdriver so as not to scratch or damage the aluminum bore.
6. Remove the torque converter drain plug cover.
7. Remove the torque converter drain plug.
8. NOTE: If equipped with a radiator in-tank transmission fluid cooler (5.4L) and an Oil-To-Air (OTA) the in-tank fluid cooler will need to be
flushed, and the OTA will need to be replaced.
NOTE: If performing the drain and refill procedure for maintenance the oil to air oil cooler will not need to be replaced. If performing an
