F 350 2WD Super Duty V10-6.8L VIN S (1999)
Install filter assembly and transmission pan.
5. NOTE: Transmission pan gasket is reusable unless damaged.
NOTE: Apply a light coat of petroleum jelly to hold the gasket to the fluid pan.
Position the (A) gasket onto the cleaned fluid pan. Make sure the (B) magnet is positioned over the dimple in the fluid pan.
6. Install the fluid pan.
1
Position the fluid pan.
2
Install the bolts.
7. Lower the vehicle.
8. CAUTION: Use only Motorcraft MERCON or MERCON V Automatic Transmission Fluid or equivalent meeting FORD specification.
The use of any other fluids can result in the transmission failing to operate in a normal manner or failure.
Refill the transmission.
^
Add 6.2 liters (6.5 quarts) of MERCON or MERCON V or equivalent meeting FORD specification to the transmission through the fluid filler
tube.
^
Start the engine. Move the transmission range selector lever through all the gear ranges.
^
Check and adjust the transmission fluid, in 0.24-liter (0.5-pint) increments, to the proper level (cross-hatched area of the fluid level indicator at
normal operating temperature.
