F 350 2WD Super Duty V10-6.8L VIN S (1999)
Transmission Position Switch/Sensor: Service and Repair
Special Tools
Removal
NOTE: If the vehicle is equipped with a Power Take-Off unit all or part of the PTO unit may need to be removed.
1. Disconnect the battery ground cable.
2. Raise the vehicle on a hoist.
3. Disconnect the connector.
4. Disconnect the shift cable at the manual control lever.
5. Remove the digital Transmission Range (TR) sensor.
1
Remove the bolts.
2
Remove the digital Transmission Range (TR) sensor.