F 350 2WD Super Duty V10-6.8L VIN S (1999)
Pressure Plate: Adjustments
1. NOTE: Self adjusting clutch pressure plate should always be adjusted before installation.
Compress the clutch diaphragm fingers.
1
Place flywheel and clutch pressure plate in a press.
2
Use a suitable adapter and press the clutch diaphragm fingers until the adjusting ring moves freely.
2. Adjust the clutch pressure plate.
^
Rotate adjusting ring counterclockwise until the tension springs are compressed.
^
Hold adjusting ring while releasing the pressure on the clutch fingers.
