F 350 2WD Super Duty V10-6.8L VIN S (1999)
Wiper Pivot: Service and Repair
REMOVAL
1. Lift the windshield wiper pivot arm off the windshield glass, to the full upright position.
2. Remove the windshield wiper pivot arm.
1
Release the locking tab.
2
Remove the windshield wiper pivot arm.
INSTALLATION
1. To install, reverse the removal procedure.
NOTE: During installation, it is necessary to pull locking tab out to its full open (unlatched) position and hold while assembling pivot arm onto
mounting arm and pivot shaft. Align the key on the pivot arm head with the key way on the shafts. This will ensure proper alignment of the pivot
arm. If necessary, key way can be removed. To adjust wiper pivot arms, refer to Wiper Blade and Pivot Arm Adjustment