F 350 2WD Super Duty V10-6.8L VIN V (2005)
7. Install the passive anti-theft system (PATS) transmitter.
1
Position the PATS transmitter.
2
Install the PATS transmitter retaining screw.
All vehicles
8. Install the upper steering column shroud.
9. Install the ignition switch lock cylinder.
-
Position the ignition switch lock cylinder to the RUN position.
-
Insert the ignition switch lock cylinder into the steering column.
-
Make sure the ignition switch lock cylinder is fully seated and aligned in the interlocking washer before turning the key to the OFF position.
-
Make sure the ignition switch lock cylinder retaining pin is seated in the hole in the steering column.
-
Rotate the ignition switch lock cylinder through all positions to verify operation.