F 350 2WD Super Duty V10-6.8L VIN V (2005)
10.
Install Special Tools Transmission Forward Clutch Assembly Installer 307-436 and Bridge Adapter 307-436-02. Position the assembly aside to
use during transmission assembly. See Figure 39.
Transmission Assembly
1.
Install a new snap ring as follows:
^
For diesel applications, install the FLAT snap ring with the anti-rotation tangs located at the 12 o'clock and 1 o'clock positions, visible between
the case teeth. See Figure 40.
^
For gasoline applications, install the WAVY snap ring with the anti-rotation tang (right end of ring) located at the 1 o'clock position between
the case teeth. This snap ring also has either a blue dot or a stamped circle mark on the left end that must face UPWARDS when installed.
2.
Install the forward geartrain.
