F 350 2WD Super Duty V8-5.4L (2008)
15. Disconnect the wiring harness pushpin connector from the No. 5 crossmember.
16. Disconnect the brake line from the position retainer behind the No. 5 crossmember.
17. Disconnect the rear fuel vapor tube from the position retainers and remove from the vehicle.
18. Disconnect the front fuel vapor tube and front fuel supply tube from the position retainer at the back of the transmission.
19. Disconnect the fuel supply tube and the fuel vapor tube from the position retainer at the rear of the engine and remove from the vehicle.
20. Disconnect the fuel tank filler pipe vent tube-to-fuel tank pressure sensor and vapor tube assembly quick connect coupling.
21. Disconnect the fuel tank pressure sensor electrical connector.
22. Disconnect the fuel tank pressure sensor and vapor tube assembly-to-EVAP canister quick connect coupling.
23. Disconnect the fuel tank pressure sensor and vapor tube assembly from the position retainers and remove from the vehicle.
24. To install, reverse the removal procedure.
