F 350 2WD Super Duty V8-5.4L (2008)
2. Remove the instrument panel (I/P) finish panel lower right bezel.
3. Up through the I/P finish panel lower right bezel opening, release the 2 lower locking tabs on the I/P control opening bezel and detach it from the
I/P finish panel.
4. Disconnect the power point electrical connector.
5. Push in the locking tab and disconnect the passenger airbag deactivation (PAD) switch electrical connector and remove the I/P control opening
bezel.
6. Remove the 3 screws and PAD switch.
7. To install, reverse the removal procedure.
8. Repower the SRS.
