F 350 2WD Super Duty V8-5.4L (2008)
webbing are not incorrectly twisted.
Both safety belt buckle assemblies
2. Fold the second row 40 and 60 percent seat backrest forward.
-
Remove the safety belt buckles from between the seat backrest and cushion.
LH side safety belt buckle assembly
3. Remove the 2 bolts, the LH side safety belt buckle assembly and felt washers.
-
To install, tighten to 40 Nm (30 lb-ft).
RH side safety belt buckle assembly
4. Remove the 2 bolts and the safety belt buckle assembly.
-
To install, tighten to 40 Nm (30 lb-ft).
Both safety belt buckle assemblies
5. NOTE:
-
When installing a new safety belt buckle assembly, make sure it is installed on the correct side. This is due to the safety belt buckles and
tongues being different sizes from the LH to the RH side.
-
Make sure the safety belt webbing is not twisted prior to installation.
To install, reverse the removal procedure.
-
Make sure the safety belt buckles are accessible to the occupant after installation.
6. Check the active restraint system for correct operation.
Safety Belt Buckle - Rear, Crew Cab, Bench Seat
SAFETY BELT BUCKLE - REAR, CREW CAB, BENCH SEAT
